Purchasing knowledge of vitrified tiles-maintenance and cleaning of vitrified tiles

Purchase knowledge of vitrified tiles - Maintenance and cleaning of vitrified tiles

Purchase knowledge of vitrified tiles

1. Look:

It is mainly to see whether the surface of vitrified tiles is glossy and bright, whether there are scratches, stains, missing, missing edges, missing feet, etc. Check the bottom trademark mark. Products produced by regular manufacturers have clear product trademark marks on the bottom. If there is no or particularly vague, it is recommended to choose carefully;

2. Listen:

Hit the tiles, if the sound is thick and the echo is long like the sound of a copper bell, the tiles will have high degree of wear resistance, high flexural strength, low water absorption, and not easy to be contaminated. If the sound is mixed If it is dumb, the degree of melting is low (even cracks appear), poor wear resistance, low flexural resistance, high water absorption, and extremely susceptible to pollution;

3. Weigh:

means to try the feel. The same specification product has good quality and high density bricks feel relatively heavy. On the contrary, the inferior products have a lighter feel;

4. Try:

First, try laying, randomly sample the products in different packaging boxes on the floor of several floors within the same model range, stand 3 meters away and observe carefully to check whether the color difference of the product is obvious, whether the gap between bricks is straight, and whether the chamfer is uniform. Second, try the feel of the foot to see if it is slippery or not. Pay attention to whether the bricks are anti-slip and there is no water added, because the water will become wetter. Maintenance of vitrified bricks

1. At the same time, the cleaning of the future is also simple. The moisture and dirt can only stay on the surface of the object. Rub it gently, and the dirt will disappear without a trace.

2. Apply a layer of SW waterproof and anti-fouling agent on the surface of unused or cleaned vitrified tiles. The moisture and dirt will never invade from now on, and the original bright effect of vitrified tiles and polished tiles will never be changed.

Cleaning of vitrified tiles

1. Use sodium hypochlorite dilution (bleach) for ink and anti-fouling wax mold to form mold. Just apply the bleach to the stain for a few minutes and then wipe it clean.

2. For stains such as tea stains, fruit stains, coffee sauce vinegar, leather shoe printing, etc., use sodium hypochlorite diluent (bleach) and soak for 20-30 minutes before wipe them clean with a cloth; some stains that have been penetrated into the brick for a long time, so the soaking time will take several hours.

3. Use hydrochloric acid or phosphoric acid solution for cement, scale, rust, and rust spots, and rub it several times.

4. Method for decontamination by using glue hammer printing: first soak with 20%-40% sodium hydroxide (NaOH) solution for 24 hours, then wipe it with a cloth, then soak it with 30%-50% hydrochloric acid (Hcl) solution for 30 minutes and then wipe it with a cloth.

5. Use alkaline cleaners or organic solvents (acetone, triethylene) to remove paint, oil markers, and anti-fouling wax layers.

6. Alkaline detergent is used for ice cream.

7. Use an acidic detergent to clean lime scale.